- VHP Housing v2.jpg (196.1 KiB) Viewed 2784 times
- Godef v22 5 on_off.jpg (1.92 MiB) Viewed 2784 times
3D Printed Housing for VHP
Return to “Google Vibrotactile Haptics Platform [VHP]”
Jump to
- The different Coordinated Reset (CR) Stimulation Frequency Sequences
- ↳ Discuss the 3 concepts from Base Document 1 [Tass 20170802]
- ↳ Discuss the 3 concepts from Base Document 2 [Tass 20210406]
- The different components needed to build and DIY vCR device
- ↳ Exciter | Resonator (electrodynamic transducer)
- ↳ Linear Resonant Actuator (LRA) vibration motors (also known as linear vibrators)
- ↳ Eccentric Rotating Mass (ERM)
- ↳ BLDC Coin Vibration Motor
- ↳ Which actuator to select?
- ↳ The actuator housing / finger bed
- ↳ What is the ideal diameter?
- ↳ How much should the skin contactor protrude from the actuator housing / Finger bed?
- ↳ Which actuator driver to select?
- ↳ Teensy® 4.1 Development Board
- ↳ The integrated actuator driver and controlling unit
- ↳ TI DRV2605L Multi-Driver Board for ERM and LRA Haptic Feedback
- ↳ Google Vibrotactile Haptics Platform [VHP]
- Current DIY builds of vCR Devices
- ↳ The Projectlist
- ↳ GODEF v1.0
- ↳ GODEF v2
- ↳ NuroMod | RMD
- ↳ Eric_T's GEN3
- ↳ HackyDev / vibrotactile-stimulator
- ↳ L_C_ | vCR Proto v1
- ↳ Pdbuzzboard
- ↳ Danteoh | vybronics
- ↳ Apollo84
- ↳ WinnieThePoo
- ↳ busters_dad | Beartech | ParkinsonsGloves
- ↳ Jason Hejna | Parkinsons_Therapy_Glove
- ↳ FreedomWavePD by RChadwick
- (DIY) Treatments with (DIY) devices
- ↳ Treatment protocol
- ↳ Treatment
- List of other VCR fora, useful references
- ↳ “Tass Vibrating Gloves: DIY, Hacks, Ideas, Prototypes” on HealthUnlocked
- ↳ "RChadwick7/ParkinsonsGloves" on Github
- About this F2HEAL Forum
- ↳ Should this forum be open to the general public?
- ↳ Suggestions for a new topic / categories
- ↳ Request permissons
- ↳ Disclamer to become forum member
- ↳ This is a TEST topic
- ↳ Leave a comment on your first impression of this mockup